Microcontroller : 32Bit based embedded system
Heater assembly: Kanthal strip (~ 22×18×0.3 mm) fixed on ~ 8 mm×8mm copper conducting roads coupled with secondary of a step-down transformer at 2V @50A winding with K- type (φ =0.3 mm) thermocouple.
Linear heating profile: PID based circuits capable of generating a linear heating rate in the range of ~ 1 -20 C/s, can also generate iso-thermal heating profile
Maximum temperature: 400^o C
Temperature sensor: K-type thermocouple with PID control mechanism
Optical Filter: Infrared (IR) cutoff filter and Provision of incorporation of additional neutral density filter.
Linearity: Better than 1%
Reproducibility: Better than ± 2 % heating profiles
TL Detection Module: Ultra-fast and ultra-sensitive detector module with photocathode (dia. 1 inch) hermetically shielded having Peak wavelength: 400 nm; Quantum Efficiency: > 40% ; Dark Current: < 5nA ; Gain: > 10⁶

TL Detection Module: Ultra-fast and ultra-sensitive detector module with photocathode (dia. 1 inch) hermetically shielded having Peak wavelength: 400 nm; Quantum Efficiency: > 40% ; Dark Current: < 5nA ; Gain: > 10⁶
Reference Light source: Temperature-stabilized blue LED for dark count calibration
Display: 7-inch multi-touch TFT display supported by a high end 64 Bit Quad core Processor operating @ 1.5GHz with 4 GB RAM and 64 GB Data storage space.
Power supply: 220 V AC, 50 Hz @ 5 A
Nitrogen purging: Internal nitrogen gas purging with Rotameter having flow rate 0.1-2 LPM
Drawer Assembly: Automatic controlled sample drawer opening/closing mechanism. Provision to operate the sample loader through software. Movement of sample stage is smooth to avoid any sample fall due to any jerk.
Sample powder recovery tray: Removable sample Recovery tray of SS to withstand high temperature.
Software: Main console software to control and monitor following:

OSL reader is a light leakage free, precisely fabricated mechanical assembly, that houses ultra-fast and ultra-sensitive SEEKER detection module with detection filter basket, Light stimulation assemblies (four) diagonally placed around detector module inside the cylindrical enclosure.
Light source can be of following wavelengths: 460-470nm or 520 – 535 nm or both based on the sample to be irradiated. The electronic circuits built-in provides constant current drive to each of the LED clusters with power control, to vary the luminous intensity. Proper heat sink and optical feedback should be present to ensure the stable light output. The output power density at the badge reader should be nearly 80 mW/cm^2.
OSL Detection Module: Ultra-fast and ultra-sensitive detector module with photocathode (dia. 1 inch) hermetically shielded having Peak wavelength: 400 nm; Quantum Efficiency: > 40% ; Dark Current: < 5nA ; Gain: > 10⁶
Reference Light source: Temperature-stabilized blue LED for dark count calibration
Optical Filter: optical filters in front of Light source and detection module.
Display: It is integrated with 7-inch multi-touch TFT display supported by a high end 64 Bit Quad core Processor operating @ 1.5GHz with 4 GB RAM and 64 GB Data storage space.

Drawer Assembly: Automatic controlled sample drawer opening/closing mechanism. Provision to operate the sample loader through software.
Mechanical: Light tight and black anodized to ensure no light from outside enters the system.
Internal bleaching station to bleach the sample.
Dimension :(50 cm x 45 cm x 45 cm)

TL / OSL Reader